New Career Job Opportunities, Training on the Job, Learn a New Skills.

Manufacturing Experience is a plus, attention to detail, and ability to learn.

Aerospace cabling company that designs and manufactures cables products for various military aircraft’s, ground support cables, power cables, EMI shielded cables, flexible and semi-rigid coax cables, control and switch panels, is hiring and “training” employee’s for Cable Assemblies, Panel Assemblies, Coax Cables, Electronic Assemblies, Wire-Harnesses Assemblies.

• Experience with small parts assemblies, cables and electrical assembly “helpful”.
• Read and understand blue-prints helpful.
• Pay DOE, weekly pay, full-time opportunities with benefits

For immediate employment apply on-line www.srmutah.com and attach resume, or call our office at 801-393-4877 @ 3776 Wall Ave. #1 Ogden, Utah

Job Type: Full-time

Salary: $15.00 – $16.00 /hour + DOE

Autoliv Airbag Manufacturing Company hiring for various positions in assembly, and production process of quality control. Start here and advance your career.

No High School Diploma needed. Background check REQUIRED!

• This is a full-time position
• Experience in production assembly
• You will need to undergo and pass a criminal background check and drug screening process
• Please provide a document or documents that establish identity and employment authorization

Job Duties, but not limited to:

• Lifting 25-40 lbs throughout a shift
• Standing 8-12 hours
• Must be hard working and able to work in a fast paced work environment
• Operating manufacturing machinery
• Assembly of small parts
• Automobile airbag production assembly

Available Shift:

Monday-Friday 2nd Shift (1:45 pm – 10 pm) Pay Rate $17.28

Sunday-Thursday 3rd Shift (9:45 pm – 6:00 am) Pay Rate $17.28

Job Location: Ogden, Utah

For immediate consideration apply online www.srmutah.com; attach a resume with your application. After applying on-line please call the office at (801) 393-4877. Or apply with-in office at 3776 Wall Ave. #1 Ogden, Utah.

Job Type: Full-time

Pay: $16.50 – $17.82 per hour

Aerospace manufacturing company that designs and manufactures ground support equipment and airport bridges has several openings for candidates with experience in assembly of Electrical/Electronics products into units.

Summary: This job encompasses all aspects of electric/electronic assemblies which can include: installation of circuit boards into military components, bridge consoles, PC Air components, Jetpowers, etc. Testing, troubleshooting, repairs, and rework.

• Testing, troubleshooting, repairs, and rework may be required.
• Must be able to use hand tools including meters and test equipment as needed.
• Will use electrical drawings and schematics to properly assemble the unit.
• Must be able to read electrical blueprints, schematics, and wiring drawings.
• Assembles all sub-assemblies and components onto the unit’s main frame (case, console, etc).

Great pay, overtime, and weekly pay!

For immediate consideration apply online at www.srmutah.com; attach your resume with your application, after applying please call the office at (801) 393-4877. Our location is at 3776 Wall Ave. #1 Ogden Utah.

Job Type: Full-time

Salary: $18.00 to $19.00 /hour

Job Type: Full-time

Pay: $18.00 – $19.00 per hour

Quality aerotech manufacturing company that designs and manufactures ground support equipment and airport bridges has several openings for candidates with experience in assembly of Mechanical products and/or Electrical/Electronics products into units.

Summary: This job encompasses all aspects of mechanical parts assemblies which can include: installation of parts into military components, bridge consoles, PC Air components, Jetpowers, etc. Testing, troubleshooting, repairs, and rework.

Responsibilities include:

• Ability to work with hand, air, electric power tools and meters.
• Wiring control panels to the PC Air military units and circuit board.
• Uses work order for specifications on how specific tasks are to be performed.
• Uses drawings and wiring diagrams to assemble parts and/or products.
• Must be able to read and understand drawings/blueprints.
• Check stock for adequate supplies, pick parts, and follows proper procedures for shortages.
• Use meters, and test equipment.
• Replace bad components or parts on electrical and electronics assemblies.
• Must posses basic math skills and read a measuring tape.

Great pay with Overtime, and Double-time with weekly pay!

For immediate consideration apply online at www.srmutah.com and attach your resume with your application, after applying please call the office at (801) 393-4877. Location 3776 Wall Ave. #1 Ogden Utah.

Salary: $18.00 to $19.00 /hour

SHIPPING CLERK

National Outdoor Sporting Goods Company of clothing lines and outdoor recreation equipment with internationally recognized brands has new openings Warehouse Fulfillment Pick & Pack, shipping & Receiving positions available.

Don’t miss out on this opportunity.

After 90 days, paid vacations and holidays off are awesome along with a benefit package is crazy phenomenal. Check this out asap, and refer your friends that want to work and receive a $100 cash bonus. Restriction apply.

• Day Shift – $16.00 Monday-Friday 6:00 am – 2:30 pm
• Swing Shift – $18.00 Monday-Friday
• Warehouse activities, dock work, includes unloading and loading products, labeling & prepping clothing items and special orders.
• Must be able to lift and move upwards of 50 lbs. This is not continuous labor intensive work, but could be at times.
• Packing, Stocking, Shipping, Receiving Palletizing/Shrink wrapping
• May include other activities as assigned. Flexibility and adaptability is important.
• Be prepared for a variety of work as needed.
• Very casual environment, fast pace, and fun place to work.
• Must consent to drug testing and background evaluation.
• Prepare products to be received or shipped from warehouse/department.
• Match actual product to associated documentation.
• Research and resolve discrepancies between actual product and associated documentation.
• Prepare routine activity reports.
• Respond to internal and external requests for information regarding receiving/shipping data or issues.
• Perform work safely and in accordance with company and customer standards and safety regulations.

For immediate consideration apply online www.srmutah.com attach a resume with your application. After applying please call the office at (801) 393-4877.

A custom fabrication company located in Ogden, UT is hiring a qualified installer.
– Applicant must have hand and power tool experience
– Blueprint navigating and reading skills
– Valid drivers license with clean driving record. (installer will be driving company vehicles)
– Some welding experience is preferred
– Applicant must be a self starter able to work alone and in a team environment.

Sandblasting rust and/or other material off of product cleaning surfaces in preparation for primer/paint and its proper adhesion. Works in paint and blast booth environment wearing proper safety equipment. Sets up, operates, and cleans sandblasting equipment, loads machine hopper with abrasives such as grit or shot. Applies masking materials to protect designated areas from abrasive action, cleans welds after sandblasting.

Pay is $18.00 – $19.00 per hour.  For immediate response please apply on line at jobs@srmutah.com and attach resume or apply with-in at 3776 Wall Ave. #1 Ogden, Utah or call 801-393-4877

Aerospace company hiring several sheet-metal assembly workers. Required to drill and rivet small and large assemblies to aircraft standards. Will use automated and manual assembly equipment in the installation of the fasteners on the assemblies, inspect your own work, using standard inspection equipment, responsible to bench parts using grinding and polishing equipment. 1 year work experience.

Pay $15.50 -$18.50 hourly. Please apply on line and attach resume or call 801-393-4877 for consideration, or apply at 3776 Wall Ave. #1 Ogden Utah

AeroTech company a manufacturing company that builds Military and Commercial Ground Support Equipment and Airport Bridges has several openings for experienced Mig Welders

Experienced Welders with Mig experience welding complex assemblies, that meet customer specifications, set-up weld fixtures and tooling fixtures to prepare to weld complex assemblies, exp. welding various materials, use metal finishing tools, basic hand tools and precise measuring equipment to achieve station planning specifications and finish product, pneumatic angle grinders, calipers, pie tapes, micrometers etc.  Minimum 1 year working in manufacturing environment in a welding capacity, have an in depth knowledge of GMAW, solid wire, 75% argon/25% Co2, vertical up groove weld w/ backup bar, flat groove weld w/ backup bar.

Must have welding certification or working towards.

Pay $$22.48 per hr.  + Overtime Pay Direct Hire

For immediate response apply on-line at jobs@srmutah.com or apply at 3776 Wall Ave. #1 South Ogden, Utah or call 801-393-4877.

AeroTech Jetway Company a manufacturing company that builds Ground Support Equipment and Airport Bridges has several openings for Material Handler/Shipper positions.

This job encompasses all aspects of material movement and shipping throughout the production facility including but not limited to any of the following:

• Coordinate movement of materials.
• Loading parts and final product for shipping. (Must be able to lift 30 – 50 lbs)
• Loads and unloads truck
• Track material, and parts, etc., through designated areas.
• Accountable for inventory, fills orders and deliver products to designated departments.
• Forklift experience, certification.
• Must be able to follow instructions, picks, boxes, and loads kits and other items for shipping.
• Must have good math and measuring skills.
• Inventory, cycle counting and prior relative experience required.
• Knowledge and experience in using MRP scanners and data entry of orders preferred.

This position is 30% on the forklift and working environment some outdoors / indoors.

Must be willing to work overtime weekdays and some weekends.

$18.00 – $19.00/Hour + Overtime + Double-time weekly pay!! 

Submit to drug test and background.

For immediate consideration apply online www.srmutah.com attach a resume with your application. After applying please call the office at (801) 393-4877.

Aerospace company in Ogden, Utah hiring Mig Welders.
Welders are mainly the first phase of the manufacturing process. They weld the large structures for the bridges and rotundas. They need to be able to weld to AWS D1.1 standards, run .045 solid wire with 75/25 argon/CO2 mix. Be able to run a 3G vertical up groove weld with a back bar and flat grove with a back bar. Welders will be provided a weld sample to determine if qualified.

Direct hire $22.48 + OT

For immediate consideration email resume, or apply in office 3776 Wall Ave. #1 Ogden, Utah, 801-393-4877